Denon DN-S5000 Instrucciones De Operación página 14

ENGLISH
Mirror Mix
• The Alpha-Track can be played with a delay of the specified beat or time after the Main Track.
r, t
Set BPM
LOCK
q The BPM for Main Track
playback can be set with
1
either the AUTO BPM
AUTO / INP
counter, TAP button or
BPM INPUT button.
Enter Mirror Mix mode
MIRROR MIX
w The Mirror Mix mode is set
2
when the MIRROR MIX
button is pressed and held
in for more than 1 second.
Set the Mirror Mix parameter
MIRROR MIX
e When the MIRROR MIX
button is pressed again
(short press), the delay beat
3
time can be set with the
PARAMETERS knob.
• When the Mirror Mix mode is set during
playback, Alpha-Track playback
paused.
14
w, e, y
q
Start Mirror Mix playback
r When the
13
button is
pressed while the Main
Track is paused or in the
4
standby mode, Mirror
Mixing starts.
• When the a 13
button is pressed while
the Main Track is playing, Mirror Mixing
resumes.
M
Pause Mirror Mix playback
t When the
13
button is
pressed during Mirror
Mixing, Mirror Mixing
pauses.
5
• The 13 button flashes.
When the a
13
button is pressed during
Mirror Mixing, playback of the Alpha-Track
only pauses.
• The a 13
button flashes.
Cancel Mirror Mix mode
MIRROR MIX
y The Mirror Mixing mode is
turned off when the
6
MIRROR MIX button is
pressed and held in for
is
more than 1 second.
Alpha Track Hot Disc
• The disc can be ejected while still Alpha-Track playing.
Data loading
When the !0 DISC EJECT button
is pressed and held in for more
than 1 second while the Alpha-
Track is playing, playback
HOT
continues and the subsequent
data is read for a maximum of 35
seconds. (at 0% pitch)
1
• If a Seamless Loop of within 35 seconds is
playing, loop playback continues.
NOTE: The Hot Disc function cannot be used
when both the Main Track and Alpha-
Track are playing.
When the Hot Disc function is started,
the Sampler data and points A and B
aside from the points for the currently
playing loop are cleared.
Eject
2
Once data loading is completed, the disc is
ejected.
Disc loading and Cue search
Load a new disc.
• Operate as usual, and cue to the beginning
of a track or match the beat.
• When at this time the Alpha-Track signals
are being output from the MAIN OUT
terminals, the disc's playback signals are
3
output from the ALPHA OUT terminals, and
when the Alpha-Track signals are being
output from the ALPHA OUT terminals, the
disc's playback signals are output from the
MAIN OUT terminals.
• The a MODE button flashes when the disc's
playback signals are being output from the
ALPHA OUT terminals.
Change output
Once cueing is completed, stop
playback, and when the #2 a
MIRROR MIX
MODE button is pressed while
it is flashing, output of the
4
disc's playback signals switches
from the MONITOR OUT to the
MAIN OUT terminals.
• Start playback from the disc and stop Hot
Disc playback.
Hot Disc clear
When the #3 a CUE button is pressed while
pressing the #6 a PITCH BEND – button, the
Hot Disc mode is turned off and the player is
set back to the normal mode.
5
SAMP. STOP
PI H BEND
NOTE: The a MODE button does not function
before the Hot Disc data is cleared.