Setting The Date; Using The Chronograph; Using The Time Different Correction; Chronograph Reset - MIYOTA FS16 Manual De Instrucciones

Instruction manual
English
page-2

Setting the Date

12 Hour-hand ( A )
Local time
Date
1. Pull the crown out to the first position when the second hands has reached
the 0 position.
2. Turn the crown clockwise to set the date. If the date is set between the hours
of around 9:00PM and 1:00PM, the date may not change on the following date.
3. After the date has been set, push the crown back to the normal position.

Using the time Different Correction

When moving to a country or area which is in a different timezone,the current
time in the "local time" can be corrected.
As the date calendar is linked with time,the date in the "local time" is also
corrected.
12 Hour-hand ( A )
Local time
Date
1. Pull the crown out to the first position when the second hands has reached
the 0 position. Turn the crown anticlockwise to set the "second time zone".
☆Date may gain in some countries or regions. In this case,please set the
date also when you set the time.
As for details, please refer to the page "the setting date".
2. After the date has been set, push the crown back to the normal position.
The time difference
between the cities and UTC time
Cal.FS16,26,17,27
12 Hour-hand ( B )
Home time
24 Hour-hand ( C )
FS26
Home time
1st Position
12 Hour-hand ( B )
Home time
24 Hour-hand ( C )
FS26
Home time
1st Position

Using the Chronograph

This chronograph is able to measure and display time from 1/1 second up to
maximum of 1 hour.
[ Measuring Time with Chronograph ]
1. The chronograph can be started and stopped each time button ( A ) is pressed.
2. To reset, press button ( B ) and the chronograph second & minute hands
return to their 0 positions.
Chronograph
second hand
Chronograph
minute hand
Hour hand
( local time )
Second hand
Reset ( A )
Measurement

Chronograph Reset

(After Replacing the Battery)
This procedure should be performed when the chronograph second hand do
not return to the 0 second position after the chronograph has been reset, and
including after the battery has been replaced.
Chronograph
second hand
Chronograph
minute hand
Hour hand
( local time )
Second hand
1. Pull the crown out to the 2nd position.
2. Press button ( A ) to set the chronograph second hand to the 0 position.
3. The chronograph hand can be advanced rapidly by continuously pressing
button ( A ) .
4. Once the hand has reached, reset the time and return the crown to its
normal position.
* Do not return crown to normal position while chronograph second hand
return to 12:00 ( ZERO ) position.
Hand stops on the way when crown are returned to normal position and
these positions are recognized as 12:00 ( ZERO ) position.
Minute hand
( A )
Button
FS26
24 hour-hand ( home time )
Normal Crown Position
( B )
Button
Calendar ( local time )
12 hour-hand ( home time )
Time
Stop
( A )
( B )
Minute hand
( A )
Button
FS26
24 hour-hand ( home time )
Normal Crown Position
( B )
Button
Calendar ( local time )
12 hour-hand ( home time )
( B )