Setting/Changing The Time And Date; Setting The Recall (Flash) Time; Labels; Wall Assembly - Avaya T3 Standart Manual De Manejo

Familiarizing Yourself with the Telephone
Starting Up

Setting/Changing the time and date

Wait until the hour indicator flashes in the display.
D
Press as often as necessary until the current hour appears.
Confirm by pressing
D
Press as often as necessary until the current minute appears.
Confirm by pressing
D
Press as often as necessary until the current day appears.
Confirm by pressing
D
Press as often as necessary until the current month appears.
Confirm by pressing
the display.

Setting the recall (flash) time

Set the sliding switch
recall) setting.

Labels

Labels are available on the telephone with which to label the numbers assigned to
the one−touch dialling keys and to the emergency service numbers.
To print a label:
Prize up the cover at the tab using your fingernail and remove the label.
Reinserting the printed label:
Insert the printed label, slide the cover into place and press down on the other side
until it snaps into place.

Wall assembly

The telephone is also suitable to be installed on a wall. You need the optionally
available wall bracket for T3 telephones to do this. In order to prevent the receiver
from falling when placed on the hook following wall installation, the receiver cradle
is equipped with a small hook device. Use a small screwdriver to turn the hook
device 180° until a small hook is produced at the top end.
38
C
. The minute indicator flashes.
C
. The day indicator flashes.
C
. The month indicator flashes.
C
. Input is then completed and the current data appears in
K
at the underside of the telephone to the "100 ms" (short
Continued