Publicidad
Idiomas disponibles
Idiomas disponibles
Hands free
To make a conversation on hands free, during conversation keep pressing
, speak at about 30cm
from microphone. During hands free mode is possible to switch on normal conversation by press
again
key and vice versa. Note: To set the speaker volume follow the procedure "Adjustment of
receiver volume".
R key (recall)
Pressing
(R) key while a phone conversation, you will access to the supplementary service of the
network (example, the call waiting if subscribed with network operator) or is useful to the
supplementary service of the PABX line for example to transfer call.
Interdigit Pause
It will put a pause of about 3 seconds between two digit, this is useful if you have a PABX line
because on many PABX is necessary to put a pause between PABX code and prefix. On pre-dialing,
after you have type at least one number, press "Pause" soft key. The pause is displayed by "-".
Use of the soft key
On handset there are 2 keys with " — " symbol. The function of this 2 keys is, each time, the writing
that are inside the 2 rectangle on lcd. For example on stand-by the left soft key correspond to
"Menu" to enter inside the Menu, the right soft key corresponds to "Redial" to check the dialed call
list.
Use of the menu
FW295 is endowed with a practical tree menu. To enter on the menu press "Menu" soft key on stand-
by mode, to look through the different option use
keys, press left soft key to enter on the sub-
menu. On the upper side of LCD there are the title of the menu, under there are the option. Use
keys to look through the option, then press left soft key to confirm the selected item. Press right
soft key to come back at the previous screen. Press
key to come back to stand-by mode.
Adjustment of receiver volume
During a phone call use
keys to choose the volume level (1= low, 2= middle, 3= high) and press
"OK" soft key to confirm.
Microphone mute
During a call, press left soft key "Mute" to mute the microphone. To enable press "Unmute" soft key.
Handset paging
Pressing the key
on the base, the handset will ring. This feature can be useful, for example, to
locate the place where you left the handset.
Out of range indication
If during a phone conversation you are far from covered range of base set, the communication will be
difficult. If you don't come back to the covered area, the line will be cut (LCD will display "Out of
range").
Battery level indication
The LCD can display 3 battery levels, when the battery icon is empty, put the handset into the cradle
for charging.
Caller Identifier (feature enable only if subscribed with Network provider)
This cordless may display the caller telephone number during ringing. It's store also the last 20 call
received /missed. When the handset ring, if the caller identifier is subscribed with network, the lcd will
show: the telephone number; or the correspondent name on Phone Book (if it's stored on Phone
Book); or "Reserved" if the number is hidden; or "Unavailable" if the caller identifier is not available.
If you doesn't answer at the calls, on stand-by is displayed how many missed call have you received,
on this screen is possible enter directly on missed call list by "View" soft key.
Received Calls list
FW295 stored on list last 20 received/missed calls (only with caller identifier subscribed)
To enter on the lists: press directly
; or press left soft key, use
keys to display "Call List",
then press "OK" soft key. Inside the list use
keys to look through the number in the list, on missed
calls not previously viewed there is the symbol Ӿ , press
to recall. If you press the left soft key
"Option" is possible to: "View", to see the hour and date of the call (see WARNING); "Save", to save
the number on Phone Book; "Delete", to delete from the list. To delete the whole list turn off/turn on
the handset. WARNING: hour and date are available only on PSTN and not on ISDN NT1 PLUS.
EN
Publicidad
