Publicidad
Idiomas disponibles
Idiomas disponibles
handset, press OK to confirm. Repeat the procedure to enter other area code to block.To disable an
area code blocked repeat the procedure and delete the area code then press OK.
"Base Reset": This procedure allow to reset the base settings, press OK, enter the previously base
PIN code (0000 default setting) and press OK, "Reset base ?" is displayed, press OK to confirm. Wait
a moment, "Not Sub" is displayed. WARNING: this procedure desuscribe all the handset from the
base also the original handset, this cause that you have to make "Handset Subscription" to use
again the cordless. NOTE: Also the clock is reset by this procedure.
SMS (only if available with your network provider)
With FW295 is possible to send/receive SMS with a maximum length of 612 characters.
WARNING: Check to your network provider if is available the SMS service, if available please ask
which are the number of the SMS service center 1 (sending) and SMS service center 2
(reception)and set the SMS with this 2 numbers as explain on next paragraph.
How to set the SMS service
To set the SMS service with the handset on stand-by press soft key "Menu" soft key; select "SMS"
and press OK; select "Settings" option and confirm by OK. A menu with 3 option will be opened:
"Service Ctr" to change the service centers number, "SMS Service" to enable/disable SMS, "Terminal
Nr." to change the terminal number of your handset.
If you enter on "Service Ctr" option: if you choose "Service Ctr 1" is possible to change the number of
the service center to send the messages, press more times Delete and enter the new number, press
OK to confirm; if you choose "Service Ctr 1" is possible to change the number of the service center to
receipt the SMS, press more times Delete and enter the new number, press OK to confirm;
-If you enter on "Terminal Nr." option is possible to change the terminal number of your handset. The
SMS on public line allows to give at each SMS telephone that are in your house, however on the
same telephone line, a terminal number so is possible to send or receive SMS on a determinate
terminal that you have on your line. For a correct working at least one telephone must be set as
terminal 0 because the SMS sent form mobile phone or SMS sent without terminal number
specification arrive only at the terminal 0. If you have more handset subscribed on the same base be
sure that all the handset have the same terminal number. But if you have more telephone SMS
telephone on the same line it must be set with different terminal number (from 0 to 9).Select the
terminal number and press OK to confirm.
How to write an SMS
Is possible to send SMS with a maximum length of 612 characters. With the handset on stand-by
press "Menu" soft key; select "SMS" option and press OK; select "Write" and press OK.
The write "Text:" is displayed; enter the text of the messages. Press "Option" soft key, a menu will be
opened where is possible to choose between: "Send" to send the messages, "Save" to save
the messages, "Delete text" to delete the whole text. NOTE: if you receive a call meanwhile
you type a messages this will be saved on Sent SMS list. NOTE: if you change the format of the
character (capital/lower case), the follow character will start form the previous format character.
Send the SMS
When you finish to write the messages press Options soft key, select "Send" and then press OK.
Now is possible to select between the following options:
"Send to one"(to send the message to one phone number): press OK, enter the telephone number or
press "Option" and found it into the phone book; after that press the soft key "Send" to send the
messages.
"Send to many" (to send the messages to many phone number):press OK, enter the first phone
number or press "Option" and found it on phonebook, then press
key to enter the 2nd phone
number and make the same procedure to enter the other number (until 5 phone numbers), to come
back on a previous locations press
key. When finish to enter phone numbers press "Send" soft
key to send the message sequentially.
"Terminal Nr."(to send to a specific terminal number)
"Notification" (to ask a notification of the result of the sending)
Receipt of an SMS message
When FW295 receive an SMS message, the write "SMS" is displayed and the base hook off the
telephone line to receive the message. If you have new messages received on display there is the
icon, if the memory is full on display there is
icon and you can't receive other messages.
EN
Publicidad
