FREEWIRE FW295 Manual Del Usuario página 19

To read the messages if you have new messages is sufficient to press the "View" soft key and you
enter directly into the received message list otherwise, with FW295 on stand-by mode, press Menu
soft key, select "SMS", press OK, use keys to select "Received SMS" then press OK soft key.
A list will be open with all the telephone number (or name if on phone book) from which you have
received the message. Look through the messages by key and press OK on desired SMS to open
and read. While reading is possible by press "Option" key to:
"Delete" to delete; "Reply" to reply ; "Forward" to forward ; "Modify" to modify ; "Details" to see some
information regarding the message.
How to delete the whole SMS received list
When the handset is on stand-by press Menu soft key, then select the "SMS" screen and press OK
soft key; select "Delete All" then press OK soft key; select "Received SMS" then press OK soft key;
Press another time OK to confirm or "Back" to not delete.
Sent SMS list
All the SMS saved are stores on the "Sent SMS" list inside the "SMS" menu, and is possible to
visualize/delete/send/modify. When the handset is on stand by mode press Menu soft key, select
"SMS" then press OK soft key; select "Sent SMS" option then press OK; on lcd the initial side of each
SMS is visualized, by keys look through the list and press OK on desired SMS to visualize.
While the SMS is visualized if you press "Option" key is possible to send, modify, delete, visualize the
details.
How to delete the whole Sent SMS list
When the handset is on stand-by press Menu soft key, then select the "SMS" screen and press OK
soft key; select "Delete All" then press OK soft key; select "Sent SMS" then press OK soft key;press
another time OK to confirm or "Back" to not delete.
SMS memory capacity
FW295 can stored until: n. 18 SMS received (each one of 160 characters), n. 18 SMS sent (each
one of 160 characters). If you received or save message that have more than 160 characters,
memory capacity is reduced proportionally. On stand-by mode, if the memory is full, there is
icon. Delete some message to receive or save new SMS.
Multi Handset Configuration
At each base is possible to subscribe 5 handset (1 original + 4 optional), is necessary that the other
handset is DECT on standard GAP.
Handset subscription
To subscribe another FW295 handset or to subscribe the original handset after a base reset:
1- Keep pressing base key until 10 seconds however until you heard a double tone from the base
with different tonality (if you heard 2 equal tone that means that you have already 5 handset
subscribed on the base and is not possible to subscribe another one). WARNING: from now you have
1 minute to finish this procedure;
2- Press "Menu" soft key and select "Subscription" is displayed then press OK;
3- Enter the base number where subscribe the handset, if you doesn't want to make a Multi Base
configuration press 1 key;
4- Wait a moment until the RFPI (an alphanumeric number, for example "0234H56012" paragraph) is
displayed, then press OK soft key;
5- Enter the base pin code 0000, then press OK key;
6- Wait a moment, the handset is subscribed on the base.
Repeat this procedure in case of failure. When the telephone receive a call all the handset will ring.
The handset number is assigned by the Base, and correspond at the first free position.In multi
handsets configurations possible to make internal call between handset, is possible to pass a call
from an handset to the other and is possible to make conference call between 2 handset and an
external caller. During conversation between one handset and an external caller, on others handsets
EXT icon is displayed and no other external calls are possible.
Intercommunication between handset
Keep pressing INT key; press the key that correspond at the handset number to call (example press
1 key to call Handset 1); press key on the other handset to answer at the internal call. To end the
conversation press key on the handsets.
Signalling of incoming call
EN