Dialled Call list
FW295 stored the last 10 dialled calls. To display: press right soft key, the last dialled number is
displayed, then use
keys to look through the list. Press
key to call the number displayed. Is not
possible to delete a single number form the list. To delete the whole list turn off/turn on the handset.
Phone Book
FW295 is endowed with an alphanumeric Phone Book with the possibility to save 60 memories. To
save a number on Phone Book with
handset on stand-by, press "Menu"
soft key, select "Phone Book", press
left soft key, "Add Entry" is displayed,
press left soft key again; enter the
name, to enter a characters press one
or more times the associated key (as
per table). Enter directly the next key if
the character is on a different key or, if
is on the same key wait until the
cursor is displayed on the next position then enter the new character, press "Delete" to delete a
characters; and press OK soft key to confirm. Enter the telephone number then press OK soft key to
save.
To recall a number from Phone Book
To recall a number from Phone Book: with handset on stand-by press
key; use
keys to look
through the phone book, inside the list is possible to jump at the first name of a character by pressing
the associated key (for example press 3 times faster 7 key, you will jump at the first name that start
with "R"; when the desired name is displayed press
key to call.
Phone Book option (delete - edit)
with handset on stand-by press "Menu" soft key, select "Phone Book" then press left soft key, now is
possible to choose between the following option: "Add Entry" to add a new number, "Modify" to edit a
number, "Delete" to delete a number, "Delete All" to delete all the numbers.
Keypad lock
The Keypad lock features is useful to avoid fortuitous typing in the key. While is activated you can't
make call but is possible to answer the calls. Keypad Lock: with handset on stand-by keep pressing
"0" key until "Keypad Lock" is displayed, now on stand by there is the icon
. To unlock keep
pressing again "0" key. Keypad Lock with PIN code: Press "Menu" soft key, select "Keypad Lock"
then press "OK" soft key; enter the handset pin code (0000 default) then press "OK". During stand-by
mode, "*Locked*" is displayed. To unlock: press "Menu" soft key then press "OK" soft key; enter the
handset pin code (0000 default) and press "OK".
HANDSET SETTING
To change the handset setting press left soft key "Menu", press 3 times
, "HS Setting" is
displayed. Press left soft key, now is possible to change the following setting:
"Clock": to adjust the clock, press OK soft key; enter the date: two digits for day and two digits for
month then press OK; enter two digits for hour and two digits for minutes and confirm by OK;
"Ext Ring": to adjust the melody & volume of ring tone, select "Melody" look trough the available
tones by
keys (you can hear each tone), select "0" to disable the handset ring tone, select
"Volume" to change the ringtones volume, use
keys to set then press OK keys to confirm.
"Int Ring": to adjust the melody & volume of internal call ring tones, follow the same procedure of
external ring.
"Key Click": to enable/disable the beep of the button, press "OK" soft and if was enable now is disable
and vice versa.
"Direct Call": While this option activated when you press any keys the handset call automatically a
previous emergency phone number. Press OK; enter the direct call number then press OK. The direct
call is now active, on lcd on stand-by "Direct Call" is displayed. To disable: press 2 times faster
key. To active again repeat the procedure.
"Select Base": see Multibase paragraph.
"Language": to select the language of the display.
"Change PIN": to change the handset pin code, press OK, enter the previous PIN (0000 default), now
EN