3
ALARM REC SETUP
ALARM REC SETUP/RECALL
❿
1
MODE -----------------------------(L6H)
2
DURATION --------------------(AUTO)
3
BUZZER ---------------------------(ON)
4
ALARM RECALL
❿
❷
(
/– +)
* To set ALARM REC in L6H
mode for 5 minutes.
❿
1. Place the "
" icon in the
"DURATION" position using
❷ ¤
❷
the SHIFT
button.
2. With each press of the SHIFT
button the display changes "SEL
3 MIN".
3. Select "SEL 5 MIN" using the
SET "+" button.
4. Press the MENU button.
• MODE: Select ALARM REC speed.
• DURATION: Set ALARM REC time.
END:MENU
❿ ❿
,
• BUZZER: Selects if the buzzer sound is on or off
• ALARM RECALL : Check Alarm recording.
Select L6H, L18H, L30H or OFF(see page 30 for details).
OFF: The unit will not Alarm REC, even when the
Alarm signal comes on.
AUTO
SEL 3MIN
TAPE END
• To set ALARM REC time.
Adjust the time from SEL 20SEC to
5 MIN using the " "set +/-" buttons.
• AUTO: If an alarm signal is received, ALARM REC
will begin and continue until the alarm signal is
interrupted. The ALARM REC will then stop (It will
not be cancelled within 1 minute).
• TAPE END: If an alarm signal is
received, ALARM REC will begin and continue to
the end of the tape.
during ALARM REC.
(Refer to page 33)
16