Further Information And Updates; Software License; Firmware Update - Festo MPS Descripción Breve

Programming module

15 Further information and updates

Further information and updates of the technical documentation for the MPS
following website:
www.festo-didactic.com > Service > MPS® Mechatronics Systems

15.1 Software license

This product uses Open-Source software, which is subject to "GNU General Public License, Version 2" and
"GNU Lesser General Public License, Version 2.1+". The licensing conditions of the GPL are located either in
the product's engineering tool or at the following address:
http://www.gnu.org/copyleft/gpl.html

15.2 Firmware update

Unzip the current firmware archive (zip file) directly to the "ModProg_firmware" directory on the USB stick
(FAT32 format). The archive contains the file "ModProg".
Before the loaded USB stick can be plugged into one of the USB ports (XF2) of the module controller, it must
be ensured that the module is completely free of voltage. When the power supply is connected, the module
will automatically start the firmware update. Following the successful update, the current firmware version
will be displayed on the lower right at the edge of the screen.
The USB stick can now be removed.
66

stations are available on the
© Festo Didactic 8046514