fortress V Serie Instrucciones De Instalación página 25

3. Position bottom UB-05 Bracket centered flat on post &
wood 2" x 4" (actual 1-1/2" [38mm] x 3-1/2" [89mm]). Use
pencil to mark top edge of bracket location on post. As
shown in Fig. 3 below.
4. Place UB-05 bracket base on previous top edge mark.
Center the base on the post and use pencil to add marks
for two screw hole locations. As shown in Fig. 4 below.
5. Dis-assemble the UB-05 bracket Adapter & Cup.
Note:
• For best results, be sure bracket base is centered on post.
Fig. 1
Universal Bracket (UB) Adapter & Cup
Fig. 2
Stair Bracket Base
Barrel
Bracket Adapter
Fig. 3
Stair
Fig. 4
V-SERIES: VERTICAL CABLE INSTALLATION
Screw
Stair Bracket Cup
Phillips Head
Thread-Cutting Screws
25