Adding Gasoline - Everbilt WG20 Guía De Uso Y Cuidado

Before Starting the Engine (continued)

ADDING GASOLINE

Remove the fuel cap and fill the fuel tank with clean fresh gasoline. This should be unleaded fuel that has an octane rating of 86 or higher.
Do not fill the tank to overflowing. Clean up any spilled gasoline before starting the engine.
OPENING THE FUEL VALVE
Move the fuel valve lever to the right to allow fuel to the engine.
CLOSING THE CHOKE
When starting a cold engine, move the choke lever to the left (closed). As the engine
warms up move it towards the right (open).
A warm engine should start with the choke open.
Highest
level
Choke
lever
Fuel valve
lever
7
Please contact 1-844-883-1872 for further assistance.
HOMEDEPOT.COM