Browsing; Backlight; Description Of The Menus - Espa SPEEDRIVE V2 Manual Del Usuario

5.2) Browsing.

5.2) Browsing. 5.2) Browsing. 5.2) Browsing.
Screen displaying
See description on screen
Flashing = pump waiting
Fixed = pump operating
Power supply plug-in
Browsing the menus.
Variation of the flashing parameter.
Browsing a submenu.
Accepting changes.
Return to the general screen from display of parameters.

5.3) Description of the menus.

5.3) Description of the menus. 5.3) Description of the menus. 5.3) Description of the menus.
START SCREENS START SCREENS
START SCREENS START SCREENS
MAIN SCREEN MAIN SCREEN MAIN SCREEN MAIN SCREEN
MANUAL OPERATION MANUAL OPERATION
MANUAL OPERATION MANUAL OPERATION
the menus
Failure

Backlight

Backlight Backlight Backlight
The screen is backlit display for better reading.
To save power, the backlight turns off in 60 seconds without pressing any keys.
To activate the backlight, press OK
Without backlight does not work any other key.
Introduction screen Introduction screen
Introduction screen Introduction screen
Displayed during a few seconds when connecting the equipment.
Indicates: model and versions of control and power software.
Start screen Start screen Start screen Start screen
The pump is not activated.
XXX: MST MST MST = Master / SLV MST SLV SLV = Slave. SLV
To start the pump manually, press ► (Man)
For automatic operation, press ◄ (Auto)
To configure parameters, press ▼ (Config)
It shows the system pressure. The pump will run automatically, as needed.
To display parameters, press ◄ (View)
To return to the start screen, press ► (Menu)
It shows the system pressure and Speedrive output frequency.
Press ▲ ON, to activate the pump. Start-up is always performed at 15Hz.
Press▼ OFF, to stop the pump.
Press◄ or ►, to adjust the frequency.
Press OK OK to exit the screen.
OK OK
OK.
OK OK
- 16 -
Browsing keys