Sound Adjustment; Demo Mode - Dentsply Sirona ProPex II Instrucciones De Uso

F.

Sound Adjustment

®
II is equipped with a sonic indicator which enables monitoring of the progression
ProPex
of the file within the canal.
This function, in conjunction with the display of progression, enables working "blind" while
still monitoring the progression of the file.
The volume can be adjusted to one of four levels: mute, low, normal and high, by
successive presses on the
G.

Demo mode

The built-in Demo mode is available to become acquainted with the device and to
demonstrate it's operation.
1. Disconnect the measuring cable or the charger from the device if connected and
turn Off the device
2. To start Demo Mode, press and hold the
the second beep sounds and "Demo" indication appears in the bottom left corner
of the display
3. During Demo cycle device operating sequence is shown on the screen. Press
button to pause the simulation; press
4. When Demo cycle is completed, it is repeated automatically until interrupted by
the operator
5. To exit Demo mode press
sounds
Note: If measurement cable is connected to ProPex
device switches automatically to normal operation mode
volume key.
button again to resume
button and hold it for about 2 sec. until a beep
(On/Off) button for about 2 sec. until
®
II during Demo cycle, the
10 / 71