Tabla De Contenido - Metra 99-5826CH Instrucciones De Instalación

Table of Contents
Dash Disassembly
- Ford Mustang 2010-2014 ...................................................................... 2
Kit Assembly
- ISO DIN radio provision with pocket ........................................................ 3
- Double DIN radio provision ..................................................................... 3
- DIN radio provision with pocket .............................................................. 4
Touch Screen
- Home screen .......................................................................................... 4
- SYNC screen .......................................................................................... 4
- Tools screens ......................................................................................5-7
- Climate control screen ......................................................................7-10
- For Single zone control ...................................................................... 8
- For Dual zone control ........................................................................ 9
- For Dual zone toggle (on/off) ............................................................ 10
99-5826CH
Dash Disassembly
1. Unclip and remove the trim panel surrounding
the shifter including the cup holders. (Figure A)
2. Remove (2) 9/32" screws from the bottom
of the radio panel then unclip and remove
the panel. (Figure B)
Note: The 4-pin harness that is connected to
this panel will connect to the supplied 4-pin to
6-pin climate extension harness, and then into
the 99-5826CH radio/housing climate panel.
3. Remove (4) Phillips screws securing the
radio. (Figure C)
4. Remove panel clips from factory radio, or
use the provided panel clips, and attach
them to the back of the radio housing.
Continue to kit assembly
(Figure A)
2
(Figure B)
(Figure C)