For Dual Zone Control - Metra 99-5826CH Instrucciones De Instalación

FOR DuAl ZONE CONTROl

(1) Temperature screen:
• Note: Temperature range is
from 60 to 90 degrees.
• Once in the temperature
screen you will have an
arrow up and down button
which will raise or lower the
temperature in the vehicle,
giving you a numerical temperature reading of the desired temperature. Once
done press the "climate home" button will take you back to the main climate
screen. Icon 11 will now show the numerical temperature that you set.
(2) Airflow button
• Note: Once set information will show up on the status bar.
• Tapping icon 12 will allow you to change between the 4 airflow modes in the
vehicle (face, feet, defrost, face & feet). Once selected icon 12 and the status bar
will now show which mode you have selected the air to flow through.
(3) Fan speed:
• Once in the fan speed screen you will be able to adjust the fan speed
by tapping the smaller fan for lowering the fan speed or the larger fan for
increasing the fan speed. Once you have selected your desired speed press the
"climate home" button to return to the main climate screen. Icon 13 will now
show the selected fan speed.
Touch Screen
Climate Controls
(4) Heated and cooled seats (if equipped):
• Note: Once set information will show up on the status bar.
• To access the heated and cooled seats menu you must tap the air flow mode
button. Once in that mode you will see the driver and passenger side heated and
cooled seat option (if your vehicle has those options equipped). Depending on
your vehicle the switches will respond differently. Once done press the "climate
home" button will take you back to the main climate screen.
Option 1
• Tapping the driver or passenger heated seat icon will turn heated seated
on and off.
Option 2
• Tapping the heated or cooled seat icon will turn the heated or cooled seats on in
3 increments indicated by the number of lines under the seat icon (sequence is
low, medium, high, and off).
9
Continued on next page