Hardware Pack - Char-Griller Premium Kettle 4822 Manual Del Usuario

HARDWARE AND TOOLS NEEDED
Assembly: Requires 2 people. Get another person to help. Tools Needed: Pliers,
Phillips Head Screwdriver and a 7/16" Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon may
prohibit parts from fitting together. All Hex Nuts should be on the inside of the grill
unless stated otherwise. Unpack all contents in a well cleared and padded area.
Estimated Assembly Time: 45 minutes
STOP! Do Not Return to Store. If you are missing parts or need assistance please
email us at Service@CharGriller.com or call 912-638-4724.
Do not attempt to assemble or use if you are missing parts.

Hardware Pack:

¼-20x ½" HEX BOLT............................................................. 17 PCS
¼-20x 3/4" HEX BOLT........................................................... 4 PCS
¼-20x 3/4" HEX BOLT WITH LOCKING COMPOUND......... 8 PCS
¼" 20 HEX NUT..................................................................... 6 PCS
M5 x 10mm MACHINE SCREW............................................ 5 PCS
1/4" FLAT WASHER - 1" OUTER DIAMETER...................... 2 PCS
1/4" FLAT WASHER - 3/4" OUTER DIAMETER................... 2 PCS
1/4" LOCK WASHER............................................................. 4 PCS
7/16" FLAT WASHER............................................................ 4 PCS
3/8" HEX JAM NUT................................................................ 2 PCS
SHOULDER BOLT................................................................. 4 PCS
UTENSIL "S" HOOK.............................................................. 3 PCS
4822_OM_A.3
B-3 3