Operating The Keys; Switching On The Hob And Cooking Zones; Switching Off A Cooking Zone; Switching Off The Hob - Teka GKST 3012 Instrucciones Para El Uso Y Montaje

Encimera vitrocerámica per inducción
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72
Operation
Suitable for induction cooking
Cooking zone selection keys
Modules (power management)

Operating the keys

The controls described here expect the pressing of a (selection) key to be
followed by the pressing of a subsequent key.
The next key will need to be pressed within 10 seconds, otherwise the
selection will be deleted.
The Plus/ Minus keys can be touched individually or be permanently pressed.

Switching on the hob and cooking zones

1. Press the ON/OFF key
The controls are ready for operation.
2. Then press a cooking zone selection key (e.g.
selected power setting display will light up brightly.
3. Use the Plus key
or Minus key
The Plus key will activate power setting 1 and the Minus key power
setting 9.
4. Immediately put cookware suitable for induction cooking onto the
cooking zone. The pan recognition device will activate the induction coil.
The pot or pan will be heated up.
The
symbol will appear until a metal cooking pot is placed onto the
cooking zone.
If no pot is placed on the cooking zone it will switch off after 10 minutes
for reasons of safety. Please observe the section on "Pan recognition"
here.
Repeat items 2 to 4 in order to cook on other cooking zones at the same time.

Switching off a cooking zone

5. Press the required cooking zone selection key (e.g.
selected power setting display will light up brightly.
6. a) Press the Minus key
shows 0, or
6. b) Press the ON/OFF key
cooking zones are switched off).

Switching off the hob

7. Press the ON/OFF key
irrespective of any settings.

Power management

For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
until the power setting displays indicate 0.
for front left). The
to select a power setting.
for front left). The
several times until the power setting display
. The entire hob will be switched off (all the
. The hob will be completely switched off,
GB
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gkst 6013Gkst 6014Gkst 8014

Tabla de contenido