Ringer Tone - GE 29472 Manual De Instrucciones

5. Press the SELECT button. The first three regional codes show in the display.
6. Use the REVIEW up and down arrow button to move the cursor to the
desired regional code and press the SELECT button to select regional
code to change setting.
7. Use the touch tone pad on your phone to enter all three digits of the
regional code. If you make a mistake, press CLEAR to clear all three
digits and re-enter the area code. When you are finished, press the
SELECT button to confirm.
8. Repeat steps 6 and 7 for each regional code.
9. When finished, press the MENU/EXIT button. If you want to start over,
press MENU/EXIT to return to the REGIONAL CODES menu.
NOTE:
• You may press the MENU/EXIT button at any step to change the
options or exit the current menu.
• You must set all three digits of the regional area code.
R T
INGER ONE
The ringer for each line can be set independently. You may choose to turn
the ringer off or select one of the available ring tones.
1. Press the MENU/EXIT button.
2. Use the REVIEW up or down arrow button to scroll to PHONE OPTIONS .
3. Press the SELECT button. SET RING TONE is displayed.
4. Press the SELECT button. The ring tone settings for each line shows in
the display.
5. Press the REVIEW up or down button to move cursor to the desired line.
Press SELECT button to select line to change settings.
6. Use the REVIEW up or down arrow button to scroll through the options.
A sample ring tone is generated when you point to individual options.
7. Press the SELECT button to confirm.
8. Repeat steps 5 to 7 for the next telephone line.
15