Safety Information; Intended Use - 3M 3320030 Manual Del Usuario

SAFETY INFORMATION

Please read, understand, and follow all safety information contained in these instructions prior to the use of this Technical Rescue
Device. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
These instructions must be provided to the user of this equipment. Retain these instructions for future reference.

Intended Use:

This Technical Rescue Device is intended for use as part of a complete personal fall protection or rescue system.
Use in any other application including, but not limited to, material handling, recreational or sports related activities, or other activities not described in
the User Instructions, is not approved by 3M and could result in serious injury or death.
This device is only to be used by trained users in workplace applications.
!
WARNING
This Technical Rescue Device is intended for use as part of a complete personal fall protection or rescue system. It is expected that all users be fully
trained in the safe installation and operation of their Technical Rescue Device. Misuse of this device could result in serious injury or death. For
proper selection, operation, installation, maintenance, and service, refer to these User Instructions and all manufacturer recommendations, see your
supervisor, or contact 3M Technical Service.
• To reduce the risks associated with working with a Technical Rescue Device which, if not avoided, could result in serious injury or
death:
- Inspect the device before each use and at least annually. Inspect in accordance with the User Instructions.
- If inspection reveals an unsafe or defective condition in the device or a component of the device, remove the device from service and repair or
replace according to the User Instructions.
- Label the device 'UNUSABLE' and immediately remove the device from service if it has been subjected to fall arrest or impact force. Inspect
and handle the device according to the User Instructions.
- Do not use this device unless you have received appropriate technical rescue training.
- Always maintain control of the device and descend at a controlled rate.
- Ensure the device and lifeline are kept free from all hazards including, but not limited to, entanglement with other workers, yourself, and
surrounding objects.
- Ensure proper procedures are used when connecting or terminating a lifeline.
- When performing rescue operations, always utilize fall protection safety measures as determined by your workplace rescue plan.
- Do not touch parts of devices exposed to high friction during or after long descents, as these parts may get hot and cause burns.
- Ensure proper edge protection is used if the lifeline may contact sharp edges or corners.
- Ensure a clear descent path, and that the landing area is clear of any obstructions or hazards that you may contact.
- Ensure that devices/subsystems assembled from components made by different manufacturers are compatible and meet the requirements
of applicable standards, including the ANSI Z359 or other applicable fall protection codes, standards, or requirements. Always consult a
Competent or Qualified Person before using these devices.
- (ROPE LIFELINE DEVICES) Use only rope described and approved in the User Instructions.
• To reduce the risks associated with working at height which, if not avoided, could result in serious injury or death:
- Ensure your health and physical condition allow you to safely withstand all of the forces associated with working at height. Consult with your
doctor if you have any questions regarding your ability to use this equipment.
- Never exceed allowable capacity of your fall protection equipment.
- Never exceed maximum free fall distance of your fall protection equipment.
- Do not use any fall protection equipment that fails pre-use or other scheduled inspections, or if you have concerns about the use or suitability
of the equipment for your application. Contact 3M Technical Services with any questions.
- Some subsystems and component combinations may interfere with the operation of this equipment. Only use compatible connections. Consult
3M prior to using this equipment in combination with components or subsystems other than those described in the User Instructions.
- Use extra precautions when working around moving machinery (e.g. top drive of oil rigs) electrical hazards, extreme temperatures, chemical
hazards, explosive or toxic gases, sharp edges, or below overhead materials that could fall onto you or the fall protection equipment.
- Use Arc Flash or Hot Works devices when working in high heat environments.
- Avoid surfaces and objects that can damage the user or equipment.
- Ensure there is adequate fall clearance when working at height.
- Never modify or alter your fall protection equipment. Only 3M or parties authorized in writing by 3M may make repairs to the equipment.
- Prior to use of fall protection equipment, ensure a rescue plan is in place which allows for prompt rescue if a fall incident occurs.
- If a fall incident occurs, immediately seek medical attention for the fallen worker for the worker who has fallen.
- Do not use a body belt for fall arrest applications. Use only a Full Body Harness.
- Minimize swing falls by working as directly below the anchorage point as possible.
- If training with this device, a secondary fall protection device must be utilized in a manner that does not expose the trainee to an unintended
fall hazard.
- Always wear appropriate personal protective equipment when installing, using, or inspecting the device/system.
FORM NO: 5908302 REV: A
sales@bestmaterials.com | http://www.bestmaterials .com
sales@bestmaterials.com | http://www.bestmaterials .com
sales@bestmaterials.com |
sales@bestmaterials.com | http://www.bestmater ia ls.com
Distributed by Best Materials® LLC
11
http://www .bestmaterials.com
http://www .bestmaterials.com
http://www.bestmaterials.com
| 1-800-474-757 0
| 1-800-474-757 0 | 1-800-474-757 0
| 1-800-474-757 0
| 1-800-474-7570
| 1-800-474-7570
EN