3M 3320030 Manual Del Usuario página 18

5.0 INSPECTION
5.1 INSPECTION FREQUENCY: The Self-Rescue System must be inspected at the intervals defined in Section 1. Inspection
procedures are described in the "Inspection and Maintenance Log" (Table 2). Inspect all other components of the Fall
Protection System per the frequencies and procedures defined in the manufacturer's instructions.
;
Self-Rescue Systems are equipped with a Radio Frequency Identification (RFID) Tag (Figure 13). The RFID Tag can
be used in conjunction with a Handheld Reading Device to simplify inspection and inventory control and provide records
for your fall protection equipment.
5.2 DEFECTS: If inspection reveals an unsafe or defective condition, remove the Self-Rescue System from service
immediately and contact 3M regarding replacement or repair. Do not attempt to repair the Fall Arrest System.
;
Authorized Repairs Only: Only 3M or parties authorized in writing my make repairs to this equipment.
5.3 PRODUCT LIFE: The functional life of the Fall Arrest System is determined by work conditions and maintenance. As long
as the product passes inspection criteria, it may remain in service.
6.0 MAINTENANCE, SERVICING, STORAGE
6.1 CLEANING: Periodically clean the Self-Rescue System's metal components with a soft brush, warm water, and a mild
soap solution. Ensure parts are thoroughly rinsed with clean water.
6.2 SERVICE: Only 3M or parties authorized in writing by 3M may make repairs to this equipment. If the Self-Rescue System
has been subject to fall force or inspection reveals an unsafe or defective conditions, remove the system from service and
contact 3M regarding replacement or repair.
6.3 STORAGE AND TRANSPORT: When not in use, store and transport the Self-Rescue System and associated fall protection
equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may exist.
Thoroughly inspect components after extended storage.
7.0 LABELS
Figure 16 illustrates labels on the Self-Rescue System. Labels must be replaced if they are not fully legible.
sales@bestmaterials.com | http://www.bestmaterials .com
sales@bestmaterials.com | http://www.bestmaterials .com
sales@bestmaterials.com |
sales@bestmaterials.com | http://www.bestmater ia ls.com
Distributed by Best Materials® LLC
18
http://www .bestmaterials.com
http://www .bestmaterials.com
http://www.bestmaterials.com
| 1-800-474-757 0
| 1-800-474-757 0 | 1-800-474-757 0
| 1-800-474-757 0
| 1-800-474-7570
| 1-800-474-7570