Before You Start - Wiseup WIFI29 Manual Del Usuario

-1× USB Cable
-1× AC110-240V to DC5V Power Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Before You Start
3.1. Get Clock Part Ready
3.1.1. Open back cover, put the backup battery in place and plug it into an outlet AC
power using the power adapter included, time display will be lit brightly.
3.1.2. Press the Set Button once and the hour will start flashing, then use the Up or Down
Button to adjust the current hour.
3.1.3. Press the Set Button once again to save the hour setting and the minute will start
flashing, then use the Up or Down Button to adjust the current minute.
3.1.4. Press the Set Button to save the minute setting.
3.2. Get WIFI Camera Part Ready
3.2.1. Make sure the Micro SD card has been formatted already and is securely fitted into
the camera's SD card slot, or it will not work. We recommend you use SDHC Class 10
Micro SD cards.
3.2.2. Power on the WIFI camera by sliding the Power Switch to the ON position. Wait
about 1-3 minutes and the blue indicator light will keep flashing slowly, which means the
camera's WIFI signal is ready.
3.2.3. If you need the camera to work 24/7 days, connect it to an outlet AC power supply
using the USB cable and power adapter included.
3.2.4. For Android, iPhone and iPad users, please scan the QR code to download the
"BVCAM" APP on your mobile devices.