Wiseup WIFI29 Manual Del Usuario página 7

How to check if remote view function works?
1. Exit the "BVCAM" APP.
2. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your
phone or mobile device from the current WIFI network, enroll your phone or mobile device
in another WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your
mobile network data instead.
3. Launch the "BVCAM" APP again. If the camera is "Online" on the "Live video" page, it
means the remote view setup is successful and the camera has entered into WAN mode. The
WIFI indicator light will be solid blue. You can go ahead to view live video or recorded video
remotely.
[Note]:
If the camera shows "Device Offline", that means the remote view setup failed and you
need to reset the camera (See VIII) and set up all over again.
V. Motion Detection Recording Setup