Wiseup WIFI29 Manual Del Usuario página 8

>> Please make sure that the camera is added to the APP in LAN or WAN mode before
you start.
5.1. Launch the "BVCAM" APP.
5.2. Set up motion detection photograph
Step1: Tap the setting icon on the "Live video" page then choose "Advance Config" or "Device
Settings".
Step 2: Go to "Alarm Config" page, there, choose your desired sensitivity level and set an
alarm schedule.
Step 3: Tap "OK" to complete the setting.
Step 4: When a movement is detected, the camera will push a warning message to your
phone and will take a screenshot of the live video page automatically.