Festo CPX-FVDA-P2 Traducción Del Manual De Instrucciones Original página 35

CPX-FVDA-P2
– Operation of switch-off groups in CPX terminals with operating mode Remote
I/O is allowed only with the following output modules approved for it:
Output module
CPX-4DO
CPX-8DO
CPX-8DO-H
CPX-8DI8DO
1)
If the residual current is exceeded, operative malfunctions are possible.
Tab. 3:
– For configuration of the CPX-FVDA-P2 only the following components are
permissible:
Component
Interlinking block
Connection block
Tab. 4:
Further information about the supported product designs of CPX can be found in
the description P.BE-CPX-FVDA-P2-... .
Detailed information about the product, the supported product designs and
required software statuses as well as the permissible components of the CPX
terminal can be found in the CPX system description P.BE-CPX-SYS-...
( www.festo.com).
Information about permissible configurations of the CPX terminal in combination
with the output module can also be found in the catalogue
( www.festo.com/catalogue).
Festo CPX-FVDA-P2-Z6 1209NH English
1)
1)
1)
1)
Permissible output modules
Type
CPX-M-GE-EV-FVO
CPX-M-AB-4-M12X2-5POL
CPX-AB-8-KL-4POL
Permissible components
35