Rules For Product Configuration - Festo CPX-FVDA-P2 Traducción Del Manual De Instrucciones Original

CPX-FVDA-P2

Rules for product configuration

– Operation of the output module CPX-FVDA-P2 is permissible only in CPX ter-
minals from Festo of the variant CPX-M-....
– All technical operating limits must be complied with (
Otherwise, malfunctions can occur.
– Operation of the CPX-FVDA-P2 is permissible only in combination with the fol-
lowing PROFIsafe-capable CPX bus node (
Bus nodes
CPX-FB13
CPX-FB33
CPX-FB34
CPX-FB35
1)
2)
Tab. 1:
– Operation of the CPX-FVDA-P2 inside of CPX valve terminals is only possible
with the following valve types:
Valve terminal
MPA-S-FB-VI
MPA-F-FB-VI
MPA-L-FB-VI
VTSA-FB-VI
VTSA-F-FB-VI
1)
If the residual current is exceeded, operative malfunctions are possible.
Tab. 2:
– The operation of switch-off groups within CPX valve terminals is allowed only
in combination with permissible pneumatics (
valve terminal).
34
from Revision
1)
30
2)
21
2)
21
2)
21
Description
P.BE-CPX-FB13...
Description
P.BE-CPX-PNIO...
Permissible PROFIsafe-capable CPX-bus nodes
Type
32
33
34
44
45
Permissible valve types
Technical data).
bus node name plate):
Network protocol
PROFIBUS
PROFINET IO
PROFINET IO
PROFINET IO
Valve types
MPA1, MPA2 on VMPA...-FB-EMG-...
MPAF1, MPAF2 on VMPA...-FB-EMG-...
1)
All
All up to width of 52 mm
All up to width of 52 mm
description for the respective
Festo CPX-FVDA-P2-Z6 1209NH English
1)
1)
1)
1)