22.0 - SEASONAL DISUSE
At the end of the season, or in the event that a stoppage of more than one month is
envisaged, it is advisable to proceed as follows:
22.1 - wash and dry the equipment, paying particular attention to removing residues
of fertilizers or chemical products.
22.2 - check and if necessary, renew damaged or worn parts.
22.3 - grease thoroughly, store the equipment in a dry area and protect it with a
tarpaulin. Apply a thin layer of lubricant to the parts not protected by galvanization or
paint.
22.4 - Position the equipment as indicated in point 12.0.
The advantages which derive from complying with the above recommendations are
exclusively of benefit to the user, who will then find the equipment in excellent condition
when it is next required.
23.0 - DISPOSAL
The machine consists of ferrous metals.
At the end of its working life it must be scrapped at an authorized waste disposal
centre.
24.0 - SPARE PARTS
Orders for spare parts must preferably be sent via an authorized dealer and
accompanied by the following information:
24.1 - type, model and serial number shown on the affixed data plate (reference 1,
page 26).
24.2 - code number and description taken from the spare parts catalogue.
24.3 - quantity requested
24.4 - shipment is made according to the customer's requests; in the absence of any
requests, it will be made by the means considered most suitable.
24.5 - the terms Left and Right are intended to indicate the left and right of the
machine when viewed from behind.
SP50
SP100
37