Horizon Global 24989 Instrucciones De Instalación página 4

1. Remove fascia screws – a.) Using a T10 torxbit socket remove (3) screws from bottom edge of fascia. b.) Using a T20 torxbit remove (2) screws from lower fascia
near rear wheels, (1) per side and keep for reinstallation.
a.)
2. Remove screws from wheel well base – Using a T20 torxbit remove (6)
screws from wheel well liner of the rear wheels, (3) per side and keep for
reinstallation.
©2019 Horizon Global Americas Inc. - Printed in Mexico
b.)
3. Remove screws from inside of wheel well liner – Using an extension socket
and a T25 torxbit remove (2) screws from the inside of wheel well liners, (1)
per side and keep for reinstallation.
Sheet 4 of 21 24989NP 10-08-19 Rev. A