Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (908 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 24993, 77993, CQT24993
Max Tongue
Weight
Weight
200 lb. (90.8 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 15
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
24993NP
3-9-20
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 24993

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear excepted.
  • Página 2: Installation Instructions

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 2000 lb. (908 kg) 200 lb. (90.8 kg) Weight Distributing Hitch Illustration ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 15 24993NP 3-9-20 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 15...
  • Página 4 Remove pullwires, install conical washers (teeth side toward hitch) and nuts, see Figure 1. ⑤ Kink pullwire to keep spacer independent of bolt Figure 2 ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 15 24993NP 3-9-20 Rev. A...
  • Página 5 5. Tighten all 7/16” - 14 Gr 5 fasteners with torque wrench to 50 Ft.Lb. (68 N*M) Proper torque is needed to keep the hitch secure to the vehicle when towing. ©2020 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 15 24993NP 3-9-20 Rev.
  • Página 6: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 7 Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.horizonglobal.com NUMÉROS DE PIÈCES : 24993, 77993, CQT24993 http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 30 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 8 Instructions d’installation Visserie : 24993F Toujours porter des LUNETTES DE PROTECTION pour installer ① Qté (4) Boulon de carrosserie NUMÉROS DE PIÈCE : 24993, 77993, CQT24993 l'attelage. 7/16-14 x 1.5‘’ GR5 Longerons ①② ② Qté (4) Espaceur 3/16 ”x 1”x 2”...
  • Página 9 (côté denté orienté vers l’attelage) et les écrous , voir Figure 1. ⑤ Plier le fil de tirage pour tenir l’espaceur à l'écart du boulon. Figure 2 ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 9 de 15 24993NP 3-9-20 Rev. A...
  • Página 10 5. Serrer toute la visserie 7/16- 14 Gr 5 au couple de serrage de 50 lb-pi (68 place. N m). Un couple de serrage approprié est nécessaire pour maintenir l’attelage fixé au véhicule lors du remorquage. ©2020 Horizon Global™ Corp. - Imprimé au Mexique Feuille 10 de 15 24993NP 3-9-20 Rev. A...
  • Página 11: Garantía Limitada De Por Vida

    GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 12: Equipo Necesario

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Sitio web: www.horizonglobal.com NÚMEROS DE PARTES: 24993, 77993, CQT24993 http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- TechnicalSupport@horizonglobal.com product Aplicaciones: Tiempo de instalación: 30 min Años Marca...
  • Página 13 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2020 Horizon Global™ Corp – Impreso en México Hoja 13 de 15...
  • Página 14 (el lado dentado hacia el enganche) y las tuercas, ver la Figura 1. ⑤ Enrollar el cable de insertar para mantener el espaciador independiente del perno Figura 2 ©2020 Horizon Global™ Corp – Impreso en México Hoja 14 de 15 24993NP 3-9-20 Rev. A...
  • Página 15 5. Apretar todos los fijadores 7/16"-14 GR5 con una llave de torque a 50 Lb.- pies (68 N*M) Se necesita la torsión adecuada para mantener el enganche unido firmemente al vehículo durante el remolque. ©2020 Horizon Global™ Corp – Impreso en México Hoja 15 de 15 24993NP 3-9-20...

Este manual también es adecuado para:

77993Cqt24993