Listening To Radio Broadcasts; Auto Tuning - Sherwood RX-4109 Instrucciones De Funcionamiento

Adjusting the sound volume balance
.
11
Enter the balance mode.
.
12
Adjust the sound volume balance between the left and right speakers.

LISTENING TO RADIO BROADCASTS

Auto tuning

.
1
Select the tuner and then the desired band.
.
2
Select the tuning mode.
.
3
Press the TUNING/PRESET UP (
•"BAL" and the balance level is displayed for 3
seconds.
•If the balance display disappears, start from the
step 11 again.
Note:
•In general, the balance level is set to 0.
• Each time this button is pressed, the band is
changed to FM or AM.
• Each time this button is pressed, the mode
changes as follows:
→ Tuning mode : "PRESET" goes off.
Preset mode : "PRESET" lights up. ←
or DOWN ( ) button for more than 0.5 second.
▲/+) ▼/-
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
12