Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Machine
cleaning").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Always check that the bolts / screws are correctly
tightened.
English language
INFORMATION FOR USE
4) Apply grease to all the unpainted parts.
5) Grease the parts that require lubrication (see "Lubri-
cation diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the resting foot to the ground to guarantee work
vehicle stability.
27
6
Use and maintenance