Safety Advice Concerning Use; Description Of The Controls; Hitching And Unhitching The Work Vehicle To And From The Tractor - Checchi & Magli WOLF COMPACT Serie Manual De Uso Y Mantenimiento

Safety advice concerning use

This ensures the machine can only be used by fit and
healthy personnel, who are suitably trained and au-
thorised, and hold the appropriate category driving
licence for a tractor.
Make sure nobody and no animals are in the machine
work and manoeuvring area.
It is up to the tractor driver to establish whether the
environmental conditions of the work area are haz-
ardous and to work safely.

Description of the controls

A
D
UN41 0115BM
A) Knob: this is used to adjust the planting depth (see
page 16).
B) Handwheels: this are used to adjust the weight on
the packing wheels (see page 16).

Hitching and unhitching the work vehicle to and from the tractor

Danger - Warning
Hitching the work vehicle up to the tractor is one of the riskiest moments as it could required the involvement
of several people at once, carrying out synchronised manoeuvres between the tractor driver and the operators
on the ground, which - if badly organised - could result in accidents.
The work vehicle must only ever be coupled to a tractor with an appropriate power rating which is equipped
with a lift that complies with the regulations in force, observing the maximum weight limit on the rear axle
and the gross vehicle weight (see tractor user manual).
Check that the work vehicle coupling to the tractor at the third point of the hitch is securely locked so that it
cannot work loose.
English language
INFORMATION FOR USE
Do not exceed the permitted gradients established
for the tractor with the equipment mounted on it
(see tractor user manual).
Keep the parts where operators tread clean to pre-
vent loss of balance when getting on and off the
work vehicle.
Before transiting on public roads, check that the trac-
tor / work vehicle assembly complies with highway
code regulations.
C) Lever: this is used to adjust the set up of the
dispenser(s) so that the seedlings are planted in the
ground upright (see pages 23 - 24).
D) Lever: this is used to change the position of the
support wheel in relation to the soil and to help
maintain correct work vehicle positioning during
work (see pages 23 - 24).
21
6
C
B
C
Use and maintenance