Maintenance Advice; Maintenance Schedule; Cups Cleaning; Cleaning The Work Vehicle - Checchi & Magli WOLF COMPACT Serie Manual De Uso Y Mantenimiento

Maintenance advice

Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary

Maintenance schedule

To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-
turer is carried out.
Maintenance schedule
Frequency Component
Dispencer
Every hour
Drilling cups
Lift frame
Every day Safety devices
Warning and hazard plates
Machine components
Every 50 hours
Nuts and bolts
Every 150 hours Tyres

Cups cleaning

Clean the moving parts of the drilling cups to remove any product residues so that the cups can move freely.
Tyres check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Check tyres pressure and restore if necessary (see "Tech-
nical characteristics").

Cleaning the work vehicle

Clean the work vehicle with a high-pressure water jet
and, if necessary, with approved detergents.
The liquid used for washing could be hazardous for the
environment due to the presence of pollutants such as
detergents, oils, etc., therefore do not simply dump the
English language

MAINTENANCE INFORMATION

maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
Type of work
Cleaning
Cleaning
Inspection
Inspection
Inspection
Greasing
Tightening inspection
Pressure check
The pressure must be checked with the weight of the
work vehicle entirely on the ground and with nothing
and nobody on the work vehicle.
wastewater; dispose of it in suitable areas equipped with
separation devices for the pollutants.
Dry with compressed air and lubricate the components
shown (see "Lubrication points diagram").
27
Manual reference
Drilling cup cleaning
Pressure check
Use and maintenance
7