Stroller Operation And Use; Unfolding And Folding Stroller - Foundations LX3 Instrucciones De Montaje Y Uso

STEP 6 - Canopy Attachment (continued)
4.
Secure back of canopy.
- Fold back panel of canopy forward
rear canopy tube rearward and attach canopy
fabric over handle support tube with fabric
hook and loop fasteners
- Slide back panel of canopy down between
handle support tube and stroller handle
(Fig. 4).
- Secure canopy sides around stroller handle
support tube by securing hook & loop fasteners
on each side
4
- Repeat on other side of canopy.
- See last page for safety cover attachment.
Stroller Assembly is now complete.

Unfolding and Folding Stroller:

• Pinch Hazard - Keep hands clear of moving parts during assembly,
folding and unfolding.
To unfold stroller:
1.
Lay stroller on floor with front wheels and front
footrests down, contacting the floor (Fig. 1).
NOTE: Always check that floor is clean
and dry before laying stroller on
floor.
2.
Lock parking brake.
3.
Locate Fold Retention Strap on one side
of the stroller (Fig. 1). Push down on stroller
handle and unhook Fold Retention Strap
by pulling up on the plastic loop
then turn 2 and slide the plastic loop
through the "D" Ring
4.
Repeat step 2 on opposite side
to unhook Fold Retention Strap.
1
, pull
(Fig. 3).
2
(Fig. 4).
Stroller Operation & Use
WARNING
and
1
3 (Fig. 2).
2
2
1
Back
3
Panel of
Canopy
4
Fold
Retention
Strap
"D" Ring
Plastic
Loop
3
2
"D" Ring
Fig. 3
1
2
2
Handle
Support
Tube
Style May Vary
Fig. 4
3
4
Fig. 1
Style May Vary
Fig. 2
1
Plastic
Loop
8