Kohler STERLING 7626 Serie Guia De Instalacion página 12

Install a GFCI-protected 120 V, 15 A grounded outlet.
Bond in accordance
with applicable codes.
8. Install the Electrical Outlet
CAUTION: Risk of personal injury. Do not turn on the power until instructed to do so.
NOTE: The whirlpool is equipped with a cord and plug. All pump and control wiring has been
completed at the factory.
NOTE: Refer to the label near the pump. This label identifies the electrical rating and model number of
the whirlpool.
Install a GFCI-protected, 120 V, 15 A grounded outlet behind the whirlpool and within 24" (610 mm)
of the pump location. No other load should be on this circuit.
If the whirlpool is equipped with a heater (not shown), install a second GFCI-protected, 120 V, 15 A
grounded outlet behind the whirlpool and within 24" (610 mm) of the pump location. No other load
should be on this circuit.
Install a bonding (grounding) conductor at the future location of the pump in accordance with any
applicable local codes.
1105582-2-F
Make sure air actuator tubing
is securely attached to the pump.
Bond in accordance with applicable codes.
NOTE:
Pump model illustrated may
differ from your actual product.
12
Pump Electrical Cord
Sterling