Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Roughing-In
(cont.)
7627
36"
(914 mm)
7628
42"
(1067 mm)
7630
36"
(914 mm)
7631
42"
(1067 mm)
IMPORTANT! All dimensions are nominal. The stud opening tolerance is +1/8" (3 mm)/-0. Carefully
measure your fixture before determining enclosure size. Some shimming between the stud frame and the
fixture may be required. If a firewall is required, the roughing-in dimensions will have to increase
according to the thickness of the firewall material. Stud opening dimensions must be measured toward the
exposed side of the wall material. Dimensions given in the roughing-in information are crucial for proper
installation. Construct the framing and plumbing accurately.
If installing this whirlpool with a shower door, refer to the shower door manufacturer's instructions for any
special framing considerations.
1. New Framing Construction
NOTE: Refer to the "Roughing-In" section for dimensions.
IMPORTANT! The whirlpool must be supported by a subfloor. Do not install directly to open floor joists.
Framing Provisions
A subfloor must be installed. The whirlpool must be positioned to allow clearance for drainage
through the floor joists or slab and to allow convenient plumbing installation.
IMPORTANT! Accessories that require backing or support are not recommended for this installation.
If installing this unit with a shower door, refer to the shower door manufacturer's instructions for
any special framing considerations. It may be appropriate to add studs for pivot shower door
support.
IMPORTANT! Construct the floor of plywood. If whirlpool is installed over material other than plywood,
friction may cause squeaking over time.
Sterling
36-1/4"
18"
(921 mm)
(457 mm)
42-1/4"
21"
(1073 mm)
(533 mm)
N/A
18"
(457 mm)
N/A
21"
(533 mm)
12"
24"
(305 mm)
(610 mm)
15"
27"
(381 mm)
(686 mm)
12"
24"
(305 mm)
(610 mm)
15"
27"
(381 mm)
(686 mm)
5
35-1/4"
34-1/4"
(895 mm)
(870 mm)
41-1/4"
40-1/4"
(1048 mm)
(1022 mm)
35-1/4"
34-1/4"
(895 mm)
(870 mm)
41-1/4"
40-1/4"
(1048 mm)
(1022 mm)
1105582-2-F
Publicidad
Tabla de contenido
