Sending Data Request; Sending Special Commands - Starrett PKG08802-UM770B Manual De Usuario

SENDING DATA REQUEST

Perform a data request by sending command "?[cr]" (where [cr] is the
carriage return character) to the output port. It will send a data request
to all instruments connected to this output port, or only to the instrument
connected on the active channel.
You can edit these parameters
in the export menu.
You can send a data request to a specific channel by sending command
"CHAx?[cr]" (where x is the channel number and [cr] is the carriage
return character) to the output port.

SENDING SPECIAL COMMANDS

Send any Sylvac command (with [cr]as end character) to the output port
You can also send command "CHAx any_command [cr]" (where x is the
channel number and [cr] is the carriage return character) if you want to
send it to a specific channel.
For example: "CHA1UNI?[cr]" to get unit from instrument connected to
the channel 1.
ENGLISH
PKG08802-UM770B 11