Disconnecting An Instrument; Reinitializing Configuration (Disconnecting All Instruments) - Starrett PKG08802-UM770B Manual De Usuario

Medidor de perforaciones electrónico
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
ENGLISH

DISCONNECTING AN INSTRUMENT

USB
1. Disconnect the instrument's cable or click the cross corresponding to
the channel to which the instrument is connected
BLUETOOTH
®
1. Deactivate Bluetooth
corresponding to the channel on which the instrument is connected , this
will erase the pairing if instrument is connected (green cross).
The "Reset Config" button can also be used to disconnect all connected
instruments (erase the Bluetooth
REINITIALIZING CONFIGURATION
(DISCONNECTING ALL INSTRUMENTS)
1. Click on the "Reset Config" button; a confirmation message will appear
2. Confirm your selection to start reinitialization
3. Reinitialization will be complete after a few seconds
8
PKG08802-UM770B
SMART
on the instrument (menu BT/OFF) or click the cross
®
pairing for connected instruments)
®

Publicidad

Tabla de contenido
loading

Tabla de contenido