Horizon Global 24991 Instrucciones De Instalación página 9

1. Remove (2) plastic underbody panels – using a flat head screwdriver, remove (4) plastic push pin rivets and loosen (1) threaded fasteners from the
driver's side panel located near wheel well area. Remove (4) push pin rivets and loosen (1) threaded fastener from the passenger's side panel.
2a. Remove lower fascia - using a flat head screwdriver, remove (4) plastic push pin rivets from the lower fascia. 1 is located on both the driver and
passenger side along with the remaining 2 near the center of the fascia. See Figure 2.
©2019 Horizon Global™ Corp. Impreso en México Sheet 9 of 36 24991NP 9-19-19 Rev. A