Initializing The Watch - Breitling BENTLEY SUPERSPORTS B55 Manual Del Usuario

adaptor also supplied (see fi gure 1). The connector is equipped with a magnet
guaranteeing the contact and a mechanical alignment system. As soon as the
contact is made, the watch confi rms with a beep sound and a luminous fl ash
on the LCD display. If the hands were stopped, they will adjust to the right time
and the word will appear in the upper screen.
CHARGE
Once the battery is fully charged, the upper screen will display
watch will give off a luminous fl ash. A full recharge takes around 2 hours.
Once the watch is disconnected from the charger cable (
upper screen), three things may happen:
1. The watch will function as usual and no action is required.
2. The watch was in sleep mode or not completely fl at: in principle, nothing needs
to be done, but for safety's sake, the initialization procedure should be conduc-
ted in order to confi rm the different states (see chapter 3).
3. The watch was completely fl at and must be initialized (see chapter 3).

3. INITIALIZING THE WATCH

When used for the fi rst time, or after having been charged, the watch guides the
user though the following sequence:
and the
BAT 100%
appears in the
UNPLUG
20
Figure 1
21