C) User Interfaces; D) Light Intensity Setting - Breitling BENTLEY SUPERSPORTS B55 Manual Del Usuario

12. SETTING: various settings that make it possible to configure and personalize the
watch – see chapter 7.
13. BAT: Battery charge status indicator – see chapter 18.
The three , and
RALLy RACE RGRALLy
they are not required (see chapter 7.h).

c) User interfaces

The watch has 3 central hands (hours H, minutes M and seconds SEC) as well as
2 digital displays: upper screen at 12 o'clock (consisting of 7 alphanumeric digits
) and lower screen at 6 o'clock (6 digits
███████
The different functions are selected by turning the crown.
The latter shows two stable axial positions:
– neutral 1 (to change functions)
– pulled out 2 (for settings)
– as well as an unstable position 0
(which acts as a pushpiece,
notably to light up the digital displays).
functions can be masked temporarily if
: : ).
88 88 88
12
The crown can be turned forwards (clockwise) or backwards (anti-clockwise).
If one forgets the crown in the pulled out position, the upper screen will display
at regular intervals, while a beep will sound every 30 seconds.
PUSH CROWN
A short press on the crown will light up the two digital displays. If the
function has been activated (see chapter 7.b), the light will automatically
switch on depending on the position of the wrist.
The watch has two pushpieces (P1 at 2 o'clock and P2 at 4 o'clock), whose action
is connected to the function selected. Depending on the desired action, the user
must give a short or long (about 2 seconds) press. If no action is associated with the
pushpieces, will appear in the upper screen.
NOP
: indicates that the watch is in the process of calculating.
WAIT
(overflow) indicates that a counter limit has been exceeded.
OVF

d) Light intensity setting

A long press on the crown activates the light intensity setting mode. This setting
takes place by turning the crown:
LIGHT
x – x which represents the level from 1 to 4. The new setting must be confirmed
/4
by a short press of the crown. After 10 seconds, the watch automatically exits the
setting function.
will appear in the upper screen, then select
13
TILT