• The upper screen displays
PENALTy
turning the crown and confirm by pressing on P1.
• The upper screen displays the first stage,
turning the crown and confirm by pressing on P1.
• The upper screen displays
VALUE
format; the hours flash.
• Define the hour of the fixed time by rotating the crown and confirm by pressing
P2. The minutes flash.
• Define the minutes by rotating the crown and confirm by pressing P2. The
seconds flash.
• Define the seconds by rotating the crown and confirm by pressing P1. The time
of the stage is adapted accordingly as well as the total time of the rally. Any
intermediate or penalty times connected to this stage will be lost. Conversely,
the original start time is retained.
• The display returns to the first stage,
the crown and repeating the same thing or pushing the crown back to neutral
position.
g) Erasing one or several rallies
• A long press on P2 with the crown in neutral position (
active rally.
,
or
; select
CANCEL
FIXEDTM
FIXEDTM
; select the stage (
STAGE01
STAGE
and the lower screen the time in HH:MM:SS
. Select another stage by rotating
STAGE01
) will erase the
ERASE
50
by
• To erase all rallies simultaneously, proceed as follows:
– Pull the crown into position 2
xx) by
– Give P2 a long press (
– Push the crown back to neutral position
h) Recovering times
If the watch is connected to a smartphone, different times recorded may be reco-
vered using the application on the smartphone.
13. RACE TRACK LAP CHRONOGRAPH (
The race track lap timer resembles the
ding intermediate times during each lap and giving the average speed per lap (if the
length of the lap is supplied). Up to 5 races, with 80 laps and 4 intermediate times
per round may be recorder (see example at beginning of user's guide).
a) Setting (
SETRACE
• Select the
• Pull the crown into position 2. The upper screen will display
by turning the crown (press P1 to activate the desired setting):
)
EMPTy
)
RACE
with the additional option of recor-
LAP TMR
)
function by rotating the crown.
RACE
51
and then
SETRACE