Breitling BENTLEY SUPERSPORTS B55 Manual Del Usuario página 31

1. Determination of the duration of independent stages/races:
2. Determination of intermediate times in a given race:
(See examples at beginning of user's guide).
A single "regularity rally" race may be "memorized" on the watch; this may
incorporate up to 30 different times.
a) Setting ( )
SET RLy
• Select the function by rotating the crown; there are 4 possible cases:
RGRALLy
1. No data was recorded, the upper display indicates
; as long as no race is defined, the chronograph cannot be started.
CROWN
2. A race has been defined but not yet timed: in this instance, the upper display
indicates alternately with xx total number of stages (
READy
total number of intermediate times (
3. A race has been defined but has not yet been concluded: the upper display
indicates alternately with yy number of stages timed in relation
STPRRLy
to xx total number of stages (
measured in relation to xx total number of times (
4. A race has been defined and fully timed: in this instance, the upper display
indicates alternately with
RGRALLy
case).
.
STAGE
.
SPLIT
followed by
SET RLy
ST00/
xx).
SP00/
yy/xx) or yy number of intermediate times
ST
yy/xx).
SP
xx/xx («stage» case) or xx/xx («split»
ST SP
56
• To define a Regularity Rally (case 1), pull the crown into position 2, and then turn
the crown (press P1 to activate the desired setting):
1. The
the times are
STAGE
pressing P1. Then, after supplying the number of stages and splits (
and confirming by pressing on P1, introduce the various times (
SPLIT
to the next time is done by pressing P1.
2.
PARK
to be parked automatically during timing. Enter the function by pressing P1.
PULL
3. Synchronizing the seconds hand (
position itself precisely on 0. Enter the function by pressing P1 and turn the
crown to reposition the hand on 0.
xx) or xx
4. Confirm the settings by pushing the crown into neutral position 1.
b) Timing a regularity rally,
• Select the
itself at noon and becomes the chronograph hand. The upper screen displays
alternately with xx number of stages (
READy
with the number of yy timed stages (
a new race.
( or ) function which makes it possible to define if
TYPE STAGE SPLIT
(intermediate times during the same timing period) or
SPLIT
(independent times). Select by rotating the crown and confirm by
xx) in HH:MM:SS by rotating the crown and confirming on P2. Switching
( or ) function which allows the minute and hour hands
PARK ON PARKOFF
SyNCHRO
mode
STAGE
function by rotating the crown; the seconds hand positions
RGRALLy
yy/xx) or
ST
57
)
HOWMANy
xx or
STAGE
), if the seconds hand does not
/xx), or alternately
ST00 STPRRLy
. to define
SET RLy PULL CROWN