Product Identification - Remington REM-B300LT-F Manual Del Usuario Y Instrucciones De Operacion

Product Identification

Models: Models:
REM-B300LT-F / REM-B200LT-F / REM-B100LT-F / REM-R280LT-F / REM-R300NT-F /
REM-B300NT-F / REM-B200NT-F / REM-B100NT-F REM-R150LM-F / REM-R180NM-F
SAFETY PILOT
This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot shuts
off the heater if there is not enough fresh air and cuts off the main burner gas in the event of flame out.
THERMOSTAT HEAT CONTROL
The control automatically cycles the burner on and off to maintain a desired room temperature (see page
21). When used as a vented decorative appliance, use of the thermostat function is prohibited. Operate
manually only.
LEG KIT (Select models)
Two (2) support legs and four (4) support leg screws are included for floor mounting the heater. See page 14.
NOTE: This is an optional accessory and is not required for operation of the heater.
FAN KIT (Select models)
The fan kit helps to distribute the warmed air into the space more rapidly.
NOTE: This is an optional accessory and is not required for operation of the heater.
©2017 Pinnacle Climate Technologies 6 Vent-Free Gas Heater User's Manual