SATA 51311 Manual Del Uso página 19

3 ）
installation grinding:
Do not use grinding wheels with safety line speed less than 80m/s. Do not use damaged, unbalanced grinding wheels.
a ） When the output shaft is completely stationary, press the shaft lock button to fix the output shaft.
b ）Fix the lower flange to the output shaft, install the grinding wheel against the lower flange, and screw the threaded
upper flange onto the output shaft（note that the upper flange The installation direction is as shown in the figure below:
when the grinding plate and the cutting slice are installed, different surface contact pieces are used）.
c ） Check whether the inner hole size of the grinding plate is completely in line with the flange flange, and tighten the upper
flange with a wrench.
4 ） Remove the wrench and release the shaft lock button.
51311/05155
中文
flange
EN DE RU KO
contact surface
PT JA ES
19