Tyco Electronics RECORDsplice RPI-SA100 Instrucciones De Instalación página 3

1 Introduction
2 Safety
3 Content and part
description
4 Ordering info
5 Important guidelines
6 General installation advice
7 Installation instruction
8 Trouble shooting
1 Introduction
The RECORDsplice connectivity system is a
splicing system, designed primarily for fiber
access networks, applicable to single mode
and multi mode in any combination of 250μ
and 900μ fiber.
The RECORDsplice connectivity system
consists out of two parts, the splice RPI-
SA100 and the toolkit RPI-TK100. The
connectivity system provides ease of
installation, a short set-up time and does not
require a controlled environment. The tool is
fully mechanical, maintenance free and does
not require any adjustments in the field. The
tool can make a total of 20.000 cleaves and
stores safely all fiber cut-offs.
2 Safety
Laser irradiation can cause serious eye
damages. Follow all local safety regulations
related to optical fiber plant elements.
3 Content and part description
3.1 Toolkit
• 1 transport case
• 1 RCAT: RECORDsplice Cleaver and
Assembly Tool. Provides a specified
angled cleave of the fiber at a specified
fiber length, and controls the steps
needed for correct installation of the
fiber(s) in the splice.
• 1 Mounting bracket: RCAT support tool
that can be mounted on a network
element or on a tripod.
• 1 detailed installation instruction.
• 1 quick reference guide.
• 1 spare fiber funnel.
• 1 warranty document
• Fiber guiding pin to remove the splice
out of the splice holder
• Fiber guiding block for 900 μ tight fiber
Note: an empty space is provided in the
transportcase to accommodate a fiber
stripper, a RECORDsplice unit pack and a
bottle of fiber cleaning solution.
3