Atlantis TRIOX TX 400 Manual Del Usuario página 39

In order to connect ANALOG AHD cameras please follow these instructions:
 A02-Adapter1 (directly connected to the Camera, up to 12W)
 A02-Adapter2 (directly connected to the Camera, up to 12W)
 A09-VDA60W-9WAY (Up to 60W, can supply several cameras)
 A02-Cable1 (18mt cable with Video/Power)
 A09-BalunAHD-Kit (This KIT uses ethernet cables for the connection to cameras
(power and video/audio are integrated onto the same cable, supporting category 5/5e
up to 100 meters) it allows to migrate in the future the infrastructure toward IP,
without further costs of wiring, safeguarding the investment)
Triox can record a number of frames and resolution limited by HW computing capacity.
The limits are due mainly to the analog part because of the heavy work sampling /
quantization / compression h264 that the incoming video streams required.
The limitations are the following:
 IP no limitation, up to 25fps per channel and 2MP
 AHD (960x1080) @ 100fps (TRIOX 400)
 AHD (960x1080) @ 160fps or AHD (1280x720) @ 160fps (TRIOX 800)
NVR CABLINK (KIT)
Unpack the package and check all the items carefully. Also, keep the box and packing
materials in case you need to ship the unit in the future. The package should contain the
following items: Triox 400, quick Start Guide (English, Italian, Spanish), USB Mouse,
adapter AC-DC 12V@5.0A, Warranty Card.
 AHD Cameras (1 or 2MP) using included cables.
 Connect a VGA/HDMI cord (not included) from your monitor to the VGA/HDMI output
on the rear panel of your NVR (or use RCA Output).
 Connect the USB mouse to the USB slot for mouse on the rear panel of the NVR.
 Connect one end of the network cable (not included) to RJ-45 port on the rear panel
of the NVR.
 Connect another end of the network cable to your router, modem or other network
connection device.
39
ENG