Plug in both of the Camera & NVR power supply to an open outlet.
2. DEVICE
Some of the pictures in this document may be slightly different from the product you
purchased.
2.1 FRONT PANEL
PORT/BUTTON
USB PORT
Channels [1‐9]
Mode [4/9/OK]
ALARM
REC
LINK
HDD
Power
MEANING
[USB 2.0] Connect USB device (Flash Drive, Hard Drive and Recorder etc).
[Mouse] Connect USB mouse device.
Into TX400 these 2 ports are located on the rear panel.
Select single channel full screen display.
Switch and display 4,9,16 channels.
Supported with new FW release.
Green during recording.
Green when LAN is connected.
Green when HDD is installed.
Red when device is ON.
40
ENG