Use of audio or video equipment for recording the image or voice of aperson without
their knowledge and consent is prohibited in certain states orjurisdictions. Nothing herein
represents a warranty or representation that the Atlantis product provided herein is
suitable for the end-user's intended use under the applicable laws of his or her state.
Atlantis disclaims any liability whats oever for any end-user use of the Atlantis product,
which fails to comply with applicable state, local, or federal laws.
Please respect ALWAYS the following settings:
The video streams will be displayed in Live (click 2 times the left button on a channel to get the display to
Full Screen, click 2 times again to go back to multi-channel mode).
In the upper left corner displays the date and time of the device. In the lower part of each video stream,
there is is a bar showing the following informations:
Function
Meaning
This icon means monitoring channel is recording;
This icon means monitoring channel is in motion detection.
In order to change the language used for OSD please open Main Menu->Setup-
>System->General. Select Language (into Language combo box), then click Apply.
After this changememt the device will restart.
On this manual these images are grabbed from 8 Channels, then some pictures can be a
little bit different when You are configuring other devices.
Use at least a resolution of 1024 * 768 in order to read the information on the screen
properly.
The Drug'n'Drop feature allows you to freely move the video streams from one window to
another by simply holding down the left mouse button and dragging the video in the
desired window.
3.2 ADD IP ONVIF CAMERAS
Click on [+] using the left mouse button.
ALL analog channels are automatically activated. You can add Onvif IP cameras but you
need, go to Main Menu- > Setup-> System- > Channel Config.
It is important to consider that some IP ONVIF cameras standard may not be supported.
IP Cameras (not compatible with Onvif) surely aren't supported.
Main Menu->Setup->System, Record Mode=OverWrite
Main Menu->Setup->System, Record days=1
44
ENG