Baxtran IB10-S Manual De Instrucciones página 31

•POSSIBLE VALUES OF THE PARAMETERS
SECOND STEP
A: Metric system
B: American system
1 0 0 0 0 1
C: other unities
D: PCS
A B C D E F
E: double range
F: units of calibration
THIRD STEP
•Use
000000kg
PACITY, considering the number of decimal zeros to be used. Ex. 150.00kg = introduce 15000 if then
selected as decimal d0.00
FOURTH STEP
•Use the Keys
dP 0.0
FIFTH STEP
•Use
diV 01
steps to follow must be completed, if they are not done the indicator will continue with the previous
configuration.
PROCESS
LF 2
•Press the key
scale will automatically restart.
262144
•Press the key
figuration and go back to the menu LF2).
100001
•Use the keys
UNITS OF WEIGHT. (press the key
000000kg
•Use the keys
MAXIMUM WEIGHT. press the key
d 0.0kg
•Use the keys
exit from the configuration and go back to the menu LF2).
div 01
•Use
and go back to the menu LF2).
0:NO
0:NO
0:NO
0:OFF
0:OFF
lb oz cannot be selected as unities of calibration.
The scale won't let us continue up to the next step if there is a mistake during the programming.
, and
, to change the position of the DECIMAL POINT.
d 0.00 d 0.000
to select the DIVISION:
After introducing the parameters LF2, the indicator will show the last configuration saved. All the
Proceed with the calibration of weight after LF2.
to start and display the internal value. Press
to continue with the configuration. (press the key
, and
, and
, and then
and then to change the step. (Press the key
1: kg 2:T
1: lb 2:lb oz
1: TW kg 2:HK kg
1: ON
1: multi interval 2:multi range
1:use metric
2:use american unities
unities
0 ~ 9
, and then press
d 0.0000
diV 01, diV 02, diV 05, diV10, diV 20, diV 50
0 ~ 9
, and then press the key
to exit from the configuration and go back to the menu LF2).
0 ~ 9
, and then press the key
to exit from the configuration and go back to the menu LF2).
to move the decimal point ( press the key
USER'S MANUAL IB10-S
3:g
3:VISS
to introduce THE MAXIMUM CA-
0.00000
to exit the menu and the
to exit from the con-
to choose the
to choose the
To exit from the configuration
EN
to
31