Electrical Connections - DITEC Sprint Manual De Instalacion Y Manutencion

4. ELECTRICAL CONNECTIONS

BATTERY
12 V/1.2 Ah
+M -M
M
WARNING:
4.1 Controls
CONTACT
1 2 (N.O.) CLOSE
1 3 (N.O.) OPEN
1 8 (N.C.) REVERSAL SAFETY
1 9 (N.C.) STOP
OFF ON
T1 / T2
COM
4.2. Output and accessories
1 +
0 -
0 15
+B - B
-
+
Fuse
5 A
+B -B
TC
Q.E. 165
VM
COM
Link up all N.C. contacts (if not used) by means of jumpers.
The terminal bearing the same number are equivalent.
FUNCTION
AUTOMATIC CLOSURE
CONTACT
SWITCH ON/OFF
CONNECTORS
SERIAL CONNECTOR
Accessories power supply. Output 24 V
(peak) for powering of auxiliary units (including units linked up to T1 and T2).
Electric lock. Max 1.2 A. (See DIP2 for selection and adjustments).
Battery. The actuator is provided with a battery which ensures operations
even in case of mains power failure.
Attention: Always ensure that the battery is connected to the electric panel.
T1/T2
TRASF
4
3
ON
2
9
1
8
T2
3
2
T1
1
Power
0
15
Alarm
DESCRIPTION
Closing contact.
The automatic closing function is enabled by a
permanent contact.
Opening contact
Reverses movement (re-opens) during closing.
By opening the 1-9 contact the door stops or
remains still.
When set to 0, the actuator is OFF (mains and
battery power are disconnected from the electrical
board). Upon turning on again (switch set to ON),
travel distance is learned when the door is opened
the first time.
Connectors for the linking up of external auxiliary
control units (for example, the RER radar).
Connectors are provided with power output (0-1), and
with closing and opening inputs (2 and 3, respectively)
Attention: With the RER radar, set the dip-switch
fitted on the radar unit to DX.
(Currently not used)
13 DITEC S.P.A - IP1546 15/09/1999 - SPRINT
RADAR A RADAR B
RER RER
.
230 V~
(Sprint J = 120 V~)
+
24 V / 0.15 A
-
/ 0.15 A (nominal) / 0.3 A